Sectors

Quarries / Mining

Integrated spare and wear parts solution for crushing, screening, loading and haulage in quarries and surface mines.

Sectors

Product lines for this sector

Crushers & Mills

Spare and wear parts for jaw, cone, gyratory, impact, hammer, twin-shaft and roll crushers, ball mills and vertical mills, with metallurgy certified cast by cast.

Vibrating Screens

Spare and wear parts for vibrating screens: screening meshes and media, protection and liners, fastening and tensioning systems, structural support and dust-suppression systems.

Rock Drilling

Complete rock-drilling line: drill bits, drill rods, hammers and accessories designed for maximum penetration rate and service life in mining, quarries and civil works.

GETs (Ground Engaging Tools)

Ground-engaging wear components for mining, construction and agriculture: teeth, tips, adapters, blades, discs, shrouds and lip protectors, compatible with CAT, Komatsu, Volvo, John Deere, Hitachi, Liebherr, JCB, Case, New Holland, among others.

Excavator Buckets

Buckets designed for maximum performance and durability in mining and quarries, in five lines by application severity: STDP, HDP, HDP PLUS, XDP and SXDP.

Bimetallic Wear Protection

Bimetallic solutions for severe wear control: a high-hardness layer (chrome white iron or carbide) over a structural steel base, combining abrasion resistance with impact absorption.

Undercarriage / Track Systems

Undercarriage system for mining: high-resistance components for tracked equipment, used in mining, quarries, mobile crushing plants and load/haul equipment.

Hydraulic Breaker Tools

Hydraulic breaker tools with controlled heat treatment (full quench and temper), high mechanical- and impact-strength alloy steel, and dimensional precision for optimal fit. Diameters from 40 to 175 mm.

Conveyor Systems

Complete conveyor belt line: belts, rollers, pulleys, supports, liners and vulcanizing cements.

Anti-Wear Steel Plates

AR400, AR450 and AR500 (370–540 HBW) anti-wear plates and chromium-carbide bimetallic plates up to 65 HRC. From heavy impact to extreme abrasion: the right grade for every wear zone — buckets, hoppers, chutes, ducts and truck bodies.

PE-UHMW Plastic Plates

PE-UHMW offers an extremely low coefficient of friction and high resistance to sliding abrasion, optimizing material flow and reducing build-up in transport, discharge and storage systems.

Welding & Hardfacing

Industrial consumables engineered for excellent arc stability, high penetration and maximum mechanical strength in MIG welding, maintenance and hardfacing applications.

Weighing & Automation (IoT)

Smart solutions for operational control in mining and heavy industry: integrated dynamic-weighing, industrial automation and IoT systems for production monitoring, material-flow control and operational optimization in mining, cement plants, ports and industrial facilities.

Products for this sector

Jaw Crusher

Fixed and movable jaws, side liners and wedges in Mn14, Mn18 and Mn22 manganese steel.

Screening Meshes & Media

Screening meshes and media in steel, rubber and polyurethane (PU) that directly define classification efficiency, throughput and final product quality.

Teeth, Tips, Adapters & Rippers

Cast in quenched-and-tempered alloy steels, with penetration and abrasion profiles matched to the rock type.

OTH (Top Hammer) Drill Bits

Threaded bits for top-hammer drilling, in T38, T45, T51, ST58, GT60 threads, among others.

Standard Line (STDP)

For general applications with low-to-moderate abrasion.

Bimetallic Buttons & Blocks

Localized protection for zones of concentrated impact and severe wear.

Track Chains

Track chains with deep-quench heat treatment.

Moil Point

Concentrated-penetration tool, ideal for compact and high-strength materials.

Conveyor Belts

EP (polyester/nylon) and NN (nylon/nylon) fabrics, with rubber covers resistant to abrasion, impact and temperature.

AR 400 Plate

Nominal hardness 370–430 HBW, tensile strength ≥1200 MPa, typical yield strength ≈1035 MPa.

PE-UHMW Liner Sheets

Replaceable liner installed over a metal structure, without welding, that reduces impact noise compared with a steel liner.

E71T-1 MIG Flux-Cored Wire

Excellent penetration and a uniform bead, with low spatter generation.

Dynamic Belt Weighing

Continuous real-time monitoring of throughput, flow and production for high-capacity industrial conveyors.

Cone Crusher

Mantles and concaves in Mn14, Mn18 and Mn22 manganese steel, in five chamber profiles.

Protection & Liners

Impact plates, deflectors and rubber liners that protect the screen structure in the highest-wear zones.

Cutting Edges & End Bits

Cutting edges and end bits in quenched-and-tempered boron steel, for maximum edge retention under severe abrasion.

DTH (Down-The-Hole) Drill Bits

Bits for DTH drilling with a down-the-hole hammer, for deep holes and high energy transfer.

Heavy Duty Line (HDP)

For demanding work requiring greater structural strength.

Bimetallic Bars (Chocky Bars)

Modular solution for continuous protection on high-wear surfaces.

Pins, Bushings, Bolts & Nuts

Grade 12.9 pins and grade 10.9 bushings, forged in alloy steel with OEM-spec heat treatment.

Flat Chisel

Designed for controlled cutting and separation of material.

Conveyor Rollers

Carrying, return and impact rollers, with rubber or polyurethane covers.

AR 450 Plate

Nominal hardness 420–475 HBW, tensile strength ≥1250 MPa.

PE-UHMW Rock Ejectors

PE-UHMW rock ejectors for mining trucks and dump trucks, installed between the tires.

ER70S-6 MIG Solid Wire

High arc stability and minimal spatter.

Gravimetric Weighing

Precise control of material dosing and feeding in automated processes.

Gyratory Crusher

Mantles and protectors in high-manganese cast steel, with concaves segmented by rows.

Fastening & Tensioning Systems

Bars, rails and fastening elements that secure the meshes and control screening tension.

Cutting Discs

Cutting discs for earthworks and civil works in hardened boron steel, in smooth, notched, wavy and slotted patterns.

Hand-Held Drill (Taper) Bits

Taper bits for hand-held drills, for deep holes and high performance across diameters.

Heavy Duty Plus Line (HDP PLUS)

Reinforced version for more aggressive conditions.

Chromium Carbide Overlay Plates

High-performance liners for extreme abrasion on flat surfaces.

Premium line

Track Shoes

Track shoes in hot-rolled profiles, in 1-, 2- and 3-grouser configurations.

Blunt Tool

Specialized for fragmenting pre-fissured materials.

Idler Supports

Carrying supports in flat, dual and triple configuration; impact and return supports.

AR 500 Plate

Nominal hardness 470–530 HBW, tensile strength ≥1350 MPa.

LZ257 (NM14-O) Hardfacing Wire

Developed for manganese steel, with high impact and abrasion resistance.

Truck Weighing

Load control, dispatch and productivity tracking for heavy-transport fleets.

Impact Crusher

Blow bars, plates and liners in manganese steel, manganese-molybdenum and high chrome, with a ceramic and carbide insert option (Premium Line).

Structural Support Components

Springs, mesh supports and secondary frames that hold up the vibrating structure.

Integral Drill Steels

Integral alloy-steel drill steels with a hardened tip for manual drilling.

Front & Side Shrouds

Protection for zones exposed to direct impact and abrasion; edge and side reinforcement to preserve bucket structure.

Extreme Duty Line (XDP)

For severe conditions with high abrasion and rock.

Wear Runners & Strips

Linear protection to optimize service life in contact zones.

Rollers (Upper & Lower)

Manufactured to OEM standard, with body and surface heat treatment.

Wide Chisel

Optimized for work on extensive surfaces.

Pulleys / Drums

Drive, return and bend pulleys, with rubber lagging for greater grip.

Bimetallic Plate (CCO)

Layer hardness 58–65 HRC (≈600–700 HBW), chromium carbide (Cr7C3) overlay.

Premium line

LZ6035 (HC-O L) High-Chrome Anti-Wear Wire

High chromium content, high hardness and abrasion resistance.

Wheel Loader Weighing

Onboard measurement to optimize loading and reduce operational overweight.

Hammer Mill

Hammers in manganese steel, manganese-molybdenum and high chrome, supplied in complete weight-balanced sets.

Dust-Suppression Auxiliary Systems

Wet and dry dust-elimination systems for screening under demanding environmental conditions.

Male-Female Extension Rods

Threaded male-female extension rods, with efficient energy transmission and high stability.

Lip Protectors (Entredientes)

Lip protection in the joint zone between adapters and teeth, reducing localized wear.

Extreme Duty Line (SXDP)

Top-tier version of the Extreme Duty line, for the operation's most severe abrasion and rock conditions.

Idlers

Cast or forged steel idlers, with induction hardening on the tread.

Conical Point

Developed for extreme working conditions.

Impact Bed

Superior impact-energy absorption and stable support for heavy loads.

E7018 Low-Hydrogen Electrode

High mechanical strength, excellent toughness and ductility.

Industrial Automation (IoT)

Smart integration with PLC, SCADA, sensors and remote industrial monitoring.

Twin-Shaft Shredder

Blades and counter-blades in quenched and tempered alloy steel, machined as matched sets to maintain cutting clearance.

Male-Male Rods

High-strength male-male threaded rods, used with coupling sleeves for maximum energy transmission and durability.

Wear & Fastening Components

Chocky bars, bolts, nuts, pins and retainers for articulated joints.

Track Tensioners

Tension spring and grease cylinder system that keeps constant chain tension.

Magnetic Separators

Automatic removal of ferrous contaminants, protecting crushers, mills and equipment.

E6013 Rutile Electrode

Easy striking and re-striking, smooth and stable arc.

Operational Supervision & Telemetry

Real-time data visualization, alarms and operational performance dashboards.

Scrap Metal Recycling Shredder

Hammers, grates, grids and liners for scrap metal shredders, in 13% manganese and martensitic steels.

Starter Rods & Couplings

Starter/shank rods and couplings ensuring alignment and efficient transmission between the rig and the drill string.

Sprockets & Segments

Cast or forged steel, precision machined for exact fit.

Vulcanizing Cements

Ideal for repairing conveyor belts.

Hardfacing Electrodes

High resistance to abrasion and impact.

Industrial Integration

Compatible with Modbus RTU/TCP, Profibus, Ethernet IP and SCADA systems.

Roll Crusher

Smooth, corrugated and toothed roll shells in wear-resistant alloys, machined with a precision fit to the core.

DTH Hammers

High-impact DTH hammers with optimized air efficiency for hard-rock drilling.

Recovery Bars

Rebuild of worn shoe profiles, restoring traction in the field.

Wear Liners

Vulcanized rubber lining over a metal base.

60% WC Nickel Powder

Hardfacing powder for thermal spray metallizing, with high surface hardness.

Premium line

Technical Service & Maintenance

Calibration, technical support, preventive maintenance and specialized operational assistance.

Ball Mill

Liners, diaphragms and wear parts for ball mills, in manganese steel, Cr-Mo alloys and high chrome.

DTH Drill Pipes

High-strength DTH drill pipes for efficient energy transmission and maximum durability.

Cast Grinding Balls (High Chrome)

Maximum abrasion resistance: high-chrome casting for dry grinding and chemically aggressive media.

Grinding Cups

High-quality grinding cups for maintaining bit edge, extending life and performance.

Rolled Grinding Balls

Balance of hardness and toughness: hot-rolled alloy steel with a homogeneous structure.

Bit Grinders

Professional bit grinders developed to restore the original bit profile, ensuring efficiency, precision and reduced operating costs.

Forged Grinding Balls

Maximum impact toughness: forged steel that resists fracture and chipping in SAG and large-diameter mills.

Vertical Mill (VRM)

Grinding rollers, table segments and internal liners for vertical roller mills, in high-chrome castings and anti-wear alloys.

Bronze & Special Alloy Components

Precision-machined components for crusher internal assemblies: main shafts, eccentric sleeves, bevel gears, flanges and bushings.

Premium Line with Ceramic & Carbide Inserts

Maximum-resistance anti-wear parts: manganese steel castings (Mn18 and Mn22) and special alloys reinforced with ceramic and tungsten/titanium carbide inserts embedded in critical wear zones.

Premium line