Sectors
Infrastructure Construction
Spare and wear parts for earthmoving, drilling and demolition in road, urban and industrial construction projects.
Sectors
Product lines for this sector
Crushers & Mills
Spare and wear parts for jaw, cone, gyratory, impact, hammer, twin-shaft and roll crushers, ball mills and vertical mills, with metallurgy certified cast by cast.
Vibrating Screens
Spare and wear parts for vibrating screens: screening meshes and media, protection and liners, fastening and tensioning systems, structural support and dust-suppression systems.
Rock Drilling
Complete rock-drilling line: drill bits, drill rods, hammers and accessories designed for maximum penetration rate and service life in mining, quarries and civil works.
GETs (Ground Engaging Tools)
Ground-engaging wear components for mining, construction and agriculture: teeth, tips, adapters, blades, discs, shrouds and lip protectors, compatible with CAT, Komatsu, Volvo, John Deere, Hitachi, Liebherr, JCB, Case, New Holland, among others.
Excavator Buckets
Buckets designed for maximum performance and durability in mining and quarries, in five lines by application severity: STDP, HDP, HDP PLUS, XDP and SXDP.
Undercarriage / Track Systems
Undercarriage system for mining: high-resistance components for tracked equipment, used in mining, quarries, mobile crushing plants and load/haul equipment.
Hydraulic Breaker Tools
Hydraulic breaker tools with controlled heat treatment (full quench and temper), high mechanical- and impact-strength alloy steel, and dimensional precision for optimal fit. Diameters from 40 to 175 mm.
Anti-Wear Steel Plates
AR400, AR450 and AR500 (370–540 HBW) anti-wear plates and chromium-carbide bimetallic plates up to 65 HRC. From heavy impact to extreme abrasion: the right grade for every wear zone — buckets, hoppers, chutes, ducts and truck bodies.
Welding & Hardfacing
Industrial consumables engineered for excellent arc stability, high penetration and maximum mechanical strength in MIG welding, maintenance and hardfacing applications.
Products for this sector
Jaw Crusher
Fixed and movable jaws, side liners and wedges in Mn14, Mn18 and Mn22 manganese steel.
Screening Meshes & Media
Screening meshes and media in steel, rubber and polyurethane (PU) that directly define classification efficiency, throughput and final product quality.
Teeth, Tips, Adapters & Rippers
Cast in quenched-and-tempered alloy steels, with penetration and abrasion profiles matched to the rock type.
OTH (Top Hammer) Drill Bits
Threaded bits for top-hammer drilling, in T38, T45, T51, ST58, GT60 threads, among others.
Standard Line (STDP)
For general applications with low-to-moderate abrasion.
Track Chains
Track chains with deep-quench heat treatment.
Moil Point
Concentrated-penetration tool, ideal for compact and high-strength materials.
AR 400 Plate
Nominal hardness 370–430 HBW, tensile strength ≥1200 MPa, typical yield strength ≈1035 MPa.
E71T-1 MIG Flux-Cored Wire
Excellent penetration and a uniform bead, with low spatter generation.
Cone Crusher
Mantles and concaves in Mn14, Mn18 and Mn22 manganese steel, in five chamber profiles.
Protection & Liners
Impact plates, deflectors and rubber liners that protect the screen structure in the highest-wear zones.
Cutting Edges & End Bits
Cutting edges and end bits in quenched-and-tempered boron steel, for maximum edge retention under severe abrasion.
DTH (Down-The-Hole) Drill Bits
Bits for DTH drilling with a down-the-hole hammer, for deep holes and high energy transfer.
Heavy Duty Line (HDP)
For demanding work requiring greater structural strength.
Pins, Bushings, Bolts & Nuts
Grade 12.9 pins and grade 10.9 bushings, forged in alloy steel with OEM-spec heat treatment.
Flat Chisel
Designed for controlled cutting and separation of material.
AR 450 Plate
Nominal hardness 420–475 HBW, tensile strength ≥1250 MPa.
ER70S-6 MIG Solid Wire
High arc stability and minimal spatter.
Gyratory Crusher
Mantles and protectors in high-manganese cast steel, with concaves segmented by rows.
Fastening & Tensioning Systems
Bars, rails and fastening elements that secure the meshes and control screening tension.
Cutting Discs
Cutting discs for earthworks and civil works in hardened boron steel, in smooth, notched, wavy and slotted patterns.
Hand-Held Drill (Taper) Bits
Taper bits for hand-held drills, for deep holes and high performance across diameters.
Heavy Duty Plus Line (HDP PLUS)
Reinforced version for more aggressive conditions.
Track Shoes
Track shoes in hot-rolled profiles, in 1-, 2- and 3-grouser configurations.
Blunt Tool
Specialized for fragmenting pre-fissured materials.
AR 500 Plate
Nominal hardness 470–530 HBW, tensile strength ≥1350 MPa.
LZ257 (NM14-O) Hardfacing Wire
Developed for manganese steel, with high impact and abrasion resistance.
Impact Crusher
Blow bars, plates and liners in manganese steel, manganese-molybdenum and high chrome, with a ceramic and carbide insert option (Premium Line).
Structural Support Components
Springs, mesh supports and secondary frames that hold up the vibrating structure.
Integral Drill Steels
Integral alloy-steel drill steels with a hardened tip for manual drilling.
Front & Side Shrouds
Protection for zones exposed to direct impact and abrasion; edge and side reinforcement to preserve bucket structure.
Extreme Duty Line (XDP)
For severe conditions with high abrasion and rock.
Rollers (Upper & Lower)
Manufactured to OEM standard, with body and surface heat treatment.
Wide Chisel
Optimized for work on extensive surfaces.
Bimetallic Plate (CCO)
Layer hardness 58–65 HRC (≈600–700 HBW), chromium carbide (Cr7C3) overlay.
Premium lineLZ6035 (HC-O L) High-Chrome Anti-Wear Wire
High chromium content, high hardness and abrasion resistance.
Hammer Mill
Hammers in manganese steel, manganese-molybdenum and high chrome, supplied in complete weight-balanced sets.
Dust-Suppression Auxiliary Systems
Wet and dry dust-elimination systems for screening under demanding environmental conditions.
Male-Female Extension Rods
Threaded male-female extension rods, with efficient energy transmission and high stability.
Lip Protectors (Entredientes)
Lip protection in the joint zone between adapters and teeth, reducing localized wear.
Extreme Duty Line (SXDP)
Top-tier version of the Extreme Duty line, for the operation's most severe abrasion and rock conditions.
Idlers
Cast or forged steel idlers, with induction hardening on the tread.
Conical Point
Developed for extreme working conditions.
E7018 Low-Hydrogen Electrode
High mechanical strength, excellent toughness and ductility.
Twin-Shaft Shredder
Blades and counter-blades in quenched and tempered alloy steel, machined as matched sets to maintain cutting clearance.
Male-Male Rods
High-strength male-male threaded rods, used with coupling sleeves for maximum energy transmission and durability.
Wear & Fastening Components
Chocky bars, bolts, nuts, pins and retainers for articulated joints.
Track Tensioners
Tension spring and grease cylinder system that keeps constant chain tension.
E6013 Rutile Electrode
Easy striking and re-striking, smooth and stable arc.
Scrap Metal Recycling Shredder
Hammers, grates, grids and liners for scrap metal shredders, in 13% manganese and martensitic steels.
Starter Rods & Couplings
Starter/shank rods and couplings ensuring alignment and efficient transmission between the rig and the drill string.
Sprockets & Segments
Cast or forged steel, precision machined for exact fit.
Hardfacing Electrodes
High resistance to abrasion and impact.
Roll Crusher
Smooth, corrugated and toothed roll shells in wear-resistant alloys, machined with a precision fit to the core.
DTH Hammers
High-impact DTH hammers with optimized air efficiency for hard-rock drilling.
Recovery Bars
Rebuild of worn shoe profiles, restoring traction in the field.
60% WC Nickel Powder
Hardfacing powder for thermal spray metallizing, with high surface hardness.
Premium lineDTH Drill Pipes
High-strength DTH drill pipes for efficient energy transmission and maximum durability.
Grinding Cups
High-quality grinding cups for maintaining bit edge, extending life and performance.
Bit Grinders
Professional bit grinders developed to restore the original bit profile, ensuring efficiency, precision and reduced operating costs.
Bronze & Special Alloy Components
Precision-machined components for crusher internal assemblies: main shafts, eccentric sleeves, bevel gears, flanges and bushings.
Premium Line with Ceramic & Carbide Inserts
Maximum-resistance anti-wear parts: manganese steel castings (Mn18 and Mn22) and special alloys reinforced with ceramic and tungsten/titanium carbide inserts embedded in critical wear zones.
Premium line